Terasic TR-5 Lite FPGA, User Manual

Page: 70 / 86

TR5-Lite User Manual 70 www.terasic.com
June 20, 2018

Power on the TR5-Lite board.

Use the USB Blaster to connect your PC and the TR5-Lite board and install USB Blaster driver
if necessary.

Execute the demo batch file “
test.bat
”(or “
test_ub2.bat
” for USB-Blaster II) under the batch file
folder, Nios_BASIC_DEMO\demo_batch

After the Nios II program is downloaded and executed successfully, a prompt message will be
displayed in nios2-terminal.

For temperature test, please input key ‘0’ and press ‘Enter’ in the nios-terminal, , as shown in
Figure 5-8 .

For programming PLL CDCD61004 test, please input key ‘1’ and press ‘Enter’ in the
nios-terminal first, then select the desired output frequence , as shown in Figure 5-9 .

For programming PLL Si570 test, please input key ‘2’ and press ‘Enter’ in the nios-terminal first,
then select the desired output frequency , as shown in Figure 5-10 .
Figure 5-8 Temperature Demo