DE10-Pro SX
Linux Botting Started
Guide
June 28, 2019
www.terasic.com.tw
9
1.6 Power On the DE10-Pro SX board
To power up the DE10-Pro SX board, there are two options available. The first method is to plug the
DE10-Pro SX board into the PCIe slot of the host PC, then turn on the PC power to power on the
).
Figure 1-7 Power on the DE10-Pro SX form PCIe slot
The second method is to connect the 2x4 PCIe connector on the DE10-Pro SX board to the external
12V DC power supply, then turn on the power switch SW2 on the board to power on the DE10-Pro
).
Figure 1-8 Power on the DE10-Pro SX form external Power
