Terasic Stratix 10 DE10-Pro SX, Started Manual

Page: 12 / 16

DE10-Pro SX
Linux Botting Started
Guide
June 28, 2019
www.terasic.com.tw
12
Figure 1-11 Hardware Setup for UART Terminal

Configure UART terminal UART terminal spec

115200 baud rate

no parity

1 stop bit

no flow control settings
The following steps show how to configure a PuTTY terminal window (can be downloaded from the
link: http://the.earth.li/~sgtatham/putty/latest/x86/putty.exe )
1. Open putty.exe, click Serial go to a serial configure interface.
2. Configure the window like the flowing picture and click “save” button to save the setting
and click “Open” to open the terminal window. Note that the “ COM5
” on the Serial Line
column needs to be modified according to the actual com port on the user's computer.