Terasic HAN Pilot Platform, Demonstration Manual, Page: 39 / 117

HAN Pilot Platform
Demonstration Manual 38 www.terasic.com
September 6, 2019
5. Power on the FPGA board.
6.
Execute the demo batch file “test.bat” under the folder “Socket_Server\demo_batch”.
7. After Nios II program is downloaded and executed successfully, a prompt message will be
displayed in nios2-terminal. Where the IP address and port numbers are assigned as shown
below in
Figure 2-38 .
Figure 2-38 Simple socket server
8. To establish connection, start the telnet client session by executing open_telnet.bat file and
include the IP address assigned by the DHCP server-provided IP along with the port number as
shown below in
Figure 2-39 .