PCoIP Management Console User Manual
choose database archive to upload. Click the
Upload
button after selecting the file. This
will initiate the transfer of the database file into the VM.
After a database is uploaded to the VM the user must restore the database from the
imported file to begin using it. This process is performed using the MC VM console. Refer
to section 3.5.2 for information on how to restore the MC database.
Downloading a Database
The
Download link
allows an administrator to transfer a database archive from the MC
VM to the host PC running the web browser. When this link is selected the user must
select the destination directory to download the archive to.
Database archives can be created using the MC VM console backup database
command. Refer to section 3.5.1 for information on backing up the MC database.
4.8.2
Environment Settings
The
Brokered
configuration setting shown in Figure 4-34 should be set equal to
Yes
if the
deployment is using a connection broker to manage Host and Zero Client peerings. The
setting should be
No
if the deployment will use the MC to manage the Host and Zero
Client peerings
Note: The
Link devices
button on the Device Management page is disabled when this
setting is
Yes.
This prevents the MC from manipulating device peering information. In a
brokered environment the device peering information is maintained by the connection
broker.
Note: When the
Brokered
setting is changed from
No
to
Yes
the MC deletes all peering
information from its database. If the administrator later changes the setting to
No
the Host
and Zero Clients must be linked again. Administrators that want to re-enable the old
peerings should backup the database prior to changing the setting to
Yes
.
4.9
Site Status
The right side of the Home web page displays summary information on all of the PCoIP
devices discovered by the MC.
TER0812002 Issue 5
70
