PCoIP Management Console User Manual
3.5.1
Backup Database
The
Backup database to archive
command allows an administrator to take a snapshot of
the current database contents and store it in an archive. The archive resides within the
MC VM.
This command should be used in conjunction with the download database command on
the Database Management web page to backup and store the contents of the database
somewhere outside of the MC VM. Refer to section 4.8.1 for information on how to
download a backup file to the host PC from the MC VM.
3.5.2
Restore Database
The
Restore database from archive
command allows an administrator to update the
active MC database from a previously stored archive. When this command is used the
archive must already reside within the MC VM.
This command should be used in conjunction with the upload command on the Database
Management web page to restore the MC database from an archive located outside of
the MC VM, possibly on the MC host machine. Refer to section 4.8.1 for information on
how to upload a backup file to the MC VM from a host PC.
Note: Section 2.6.2 describes the specific information that will and will not be imported
into the MC by the Restore Database command.
3.5.3
Delete Database
The
Delete database archive
command allows the administrator to delete a database
archive from the MC VM.
3.6
Change Time Zone
The MC retrieves the current time from the host machine. The host machine provides this
time in Coordinated Universal Time (UTC) form. The host does not provide time zone
information, which means the user must configure the time zone.
To configure the time zone select the
Change timezone
option on the MC VM console.
The user must select a geographic area that determines the time zone. For example, the
user should select America/New York if located in the same time zone as New York City.
Note: The MC can be used without configuring the time zone. The time displayed at the
top of the MC VM console will be incorrect and the timestamps displayed on various
screens in the MC Web Interface will be incorrect. Users are recommended to configure
the time zone to match their time zone.
3.7
Restart Management Console Daemon
To restart the MC daemon select the
Restart MC daemon
option on the MC VM console.
A message indicating the daemon is restarting is displayed on the MC VM console while
the VM restarts. This can be used to determine when the restart is complete. This
command should be executed if the MC daemon status reported on the console interface
shown in Figure 3-1is
stopped
. It should also be executed if the Management Console
Health shown in the Site Status section of the home page is not
Good.
TER0812002 Issue 5
32
