© 2 0 1 4 . T e r a d e k , L L C
P a g e |
1 8
Streaming Control
Item
Description
Streaming Interface
Current streaming interface: WiFi or Ethernet LAN. This can be configured via Beam’s
Front panel.
Streaming Mode
Select P2P mode when streaming over WiFi, or when connecting point-to-point over a
LAN. Select Multicast when connecting to a multicast encoder.
Peer IP (LAN)
In P2P mode, set the Peer IP to the encoder’s IP address.
Group IP (Multicast)
In Multicast mode, set the Group IP to match the address configured at the Beam TX.
TS Decoding
Select On to enable video output from the decoder when streaming MPEG-TS. Select
Off when just using the decoder to relay Transport Stream.
Audio Intercomm
Select
On
to allow for two-way stereo talkback communication.
Relay Server
Enable this to allow the Beam decoder to re-stream the video it receives from an
encoder. The encoder determines whether the relay server uses RTSP or MPEG-TS. The
decoder can output video and relay the stream simultaneously.
RTSP Streaming Mode Select whether to use Unicast (P2P) or Multicast for the decoder’s Relay server. When
multicast is enabled, the RTSP stream is still available at
