ENC-500
™
User Guide V1.0
21
3.8
System
3.8.1
System settings
Reboot the ENC-500 or reset to factory default.
The Encoder is reachable after factory default with default IP Address 172.16.20.100
Figure 15: ENC-500 System settings
3.8.2
Change Password
To change the password due to security issues, click on the submenu ‘Change Password’. Enter twice
the new password in the provided boxes. Then click the ‘Apply’ button to change the Password.
On the next login, enter the new Password.
.!.
All letters, numbers and following special characters are allowed: @$( )
.!.
The maximum length is 32 characters.
.!.
The Password is case sensitive.
Figure 16: ENC-500 Change Password
.!.
Teracue recommends changing the password. In normal scenarios a short password will
be enough. In critical scenarios you should use a long password with a minimum of 8
characters. Use always a combination of small, big letters and special characters.
.!.
If login is impossible due to Password issue you have to reset ENC-500 to factory defaults
see chapter 4.1.
