ENC-400-HDMI
™ H.264 Encoder
User Guide V 2.1
53
3.4.24 Menu: System / Remote
shows the ‘System / Remote’ page of the ENC-300™ encoder.
.!.
When Encoder is working in public Network, Teracue recommend to disable all not needed
Ports and enable HTTPS.
Figure 38: System/Remote page of the ENC-
300™ encoder
Settings:
Description:
Remote Configuration Port:
Enables / Disables the port 2323 for remote controlling. If you want
use the remote control function, you must enable the ‘Remote
Configuration’ field. Then hit the ‘APPLY’ and ‘SAVE’ button. For
more information about remote control, please see chapter 4.1 on
page 59.
Telnet Access
Enables / Disables Telnet on port 23
HTTPS:
Switch between HTTP on Port 80 or HTTPS on Port 443
When HTTPS is enabled you will be forwarded
automatically to
HTTPS when you enter HTTP
SNMP:
Enables / Disables SNMP on port 161
SSH
Enables / Disables SSH on Port 22
Table 28: Description of the Remote Settings webpage of the ENC-
300™
Each ENC-300 has a unique, self-generated certificate for HTTPS Internet access to the user interface.
Since the ENC-300 certificate is not known to any certification authority or to the computer's local
certificate administration, the web browser displays a certificate warning when you try to access the
ENC-300.
The certificate warning only means that the browser cannot verify the authenticity and integrity of the
ENC-300. Even if the browser claims that the connection is insecure, opening the ENC-300 user
interface does not pose a security risk!
You can avoid the certificate warning by downloading the unique certificate generated by the ENC-300
itself and importing it to the computer's certificate administration.