DMM-Series
User Guide V1.2
10
TS ID: 1~65535
Program List: Select program.
Output Bit Rate: Display Output bit rate
Ethernet
Stream IP Addr: 1.0.0.1~223.255.255.254
Stream Netmask: 1.0.0.1~223.255.255.254 and 0.0.0.0
Stream
Gateway:
1.0.0.1~223.255.255.254
and
224.0.0.0~239.255.255.255
Stream Mac address: Display factory-Set Mac addresses
Gateway Mac address: Edit Gateway Mac address
Multicast IP Addr: Enter the IP address of the Multicast Stream
for the transport Stream over IP.
Multicast UDP Port: Enter the UDP Port number of the TS over
IP stream.
Protocol: UDP/RTP
TS Pkts Per UDP: 1~7
Time to live: 1~255
Type Of Service: Min Delay/Max Reliability/Max Throughput/Min
Monetary Cost/Normal
Source: Tuner/ASI input/Mux TS/CI De-encrypted
Mode: IPTV/DVB
Uni-/Multicast Setup
Max Channels: 1~32
Channel 0~31
Switch:
On/Off.
Enable
or
disable
the
channel.
Multicast IP Address: 224.0.0.0 ~ 239.255.255.255
*(When using Unicast, the Multicast IP Address should be
set as the IP address of the receiving device.)
Multicast UDP Port: 1~65535
Target MAC Address: Edit Target MAC Address
Program List: Select program
Backup
Main channel: ASI/Tuner.
Backup channel: ASI/Tuner.
Main CH Unlock Time: set Main CH Unlock Time, ranging from 0
to 59 seconds. When signal of the main channel remains the
disconnected status over this value, the unit will switch to the
backup channel automatically.
Main CH Recover Time: set Main CH Recover Time, ranging
from 0 to 59 seconds. When the signal of the main channel
recovers and remains stable over this value, the unit will switch
back to the main channel.
Local Setup
IP Address: 1.0.0.1~223.255.255.254
Netmask: 1.0.0.1~223.255.255.254 and 0.0.0.0
Gateway:
1.0.0.1~223.255.255.254
and
224.0.0.0~239.255.255.255
MAC Address: Display MAC Address
Trap IP Addr
Trap IP Addr
Unit Name
Unit Name
Properties
Main Version
Linux OS Version
ARM S/W Version
Decoder Version
FPGA Version
TS/IP Out NIOS
TS/IP Out FPGA
Factory Setting
Enter: Yes, Exit: No
Optional
Function
External Board Type: 100M Single In/100M Single Out/No Exist
Mux Function: Enable/Disable
Filter Function: Select from Disable/Filter/Mux.
HTTP Login
Modify the username and password for the WEB management.
