3. Mechanical integration
3.1 Mechanical design and mounting
For increased robustness, Terabee 3Dcam 80x60 offers an anodized aluminum casing.
Figure 3 illustrates external dimensions of the camera.
Figure 3. External dimensions of Terabee 3Dcam 80x60
The bottom casing (flat) part includes four slots for mounting the camera using M4
screws. You can mount the Terabee 3Dcam 80x60 using the following two methods: (1)
front-panel mount using the long M4 screw slots or (2) for a more discreet and
integrated look use the back-panel mounting shoulder in the front side of the camera.
The 3mm ledge offers users the possibility to mount the camera behind a surface (e.g
panel), ideally with a 3mm thickness. See figures 4 and 5 for visualizations. Please note
that mounting components (e.g. screws) are not included in the product package. For
more information on mounting, please contact us at
Copyright
©
Terabee 2019
Terabee, 90 Rue Henri Fabre
01630, St Genis-Pouilly, France (next to CERN)
6/17
