GSS3220A
Instruction Manual
8
Step 5 (Tank support assembly)
a) Loosen the pre-installed bolts on the tank support (G),
align the holes of tank support with the holes on the
right side panel, and screw the bolts from outside until
secure.
Step 4 (Assemble the front beam to the cart)
a) Place the front beam (F) on the two cart side
panels.
b) Align the two holes on the right end of front beam
(F) with the top & side two holes on the frame of
cart right side panel.
c) Insert one bolt (AA) with one spring washer (DD)
and one flat washer (CC) into each pre-drilled
hole. Tighten bolts by hand until secured.
d) Repeat the procedure for the frame of cart left
side panel.
e) Go back and tighten all bolts using the
screwdriver provided.
Step 6 (Basket assembly)
a) Pull out the basket support (I) and loosen the
pre-installed flat washer, spring washer and
nut on the shaft of the basket. Insert the four
shafts of the basket into the four holes of the
basket support.
b) Insert the flat washer, spring washer and nut
on to each shaft from bottom of the basket
support. Tighten by hand until secured.
