background image

For your safety 

 

 

V-04/2018

 

For your safety 

 Warning! 

 

Failure to comply with the safety information and 
instructions can cause electric shock, fire and/or 
severe injuries. 

►  Read all safety information and instructions. 

  

2.1 

General safety information 

  Store all safety information and instructions for future reference. The term 

device used in the safety information refers to mains-powered devices 
(with a mains cable) and to battery-powered devices (without a mains 
cable). 

  Danger of death and accident for small children and children! Never leave 

children unattended with the packaging material and the product. There is 
a danger of suffocation from the packaging material and danger of death 
from strangulation. Children often underestimate dangers. Always keep 
children away from the product. The product is not a toy. 

  For safe use of this device the user of the device must have read and 

understand this operating manual prior to the first use of the device. 

  If you sell or pass on the device, be sure to include this operating manual 

with the device. 

  This device is not intended for use by persons (including children) with 

impaired physical, sensory or mental capacities or insufficient experience 
and/or insufficient knowledge, unless they are supervised by a person who 
is responsible for their safety or receive instructions from that person on 
how to use the device. 

  The device may be used only if it is in perfect working order and 

completely mounted. If the device or a component thereof is defective, it 
must be taken out of operation and repaired by a specialist or properly 
disposed of. 

Summary of Contents for LAP-TEQ PLUS





































Reviews: