WiH130 User Guide
Delete a Wireless Transmitter
：
1. Press the remote control
DELETE
Button, HDMI Display shows message
, Use
∧∨
＜＞
button select a Transmitter
，
than
press
OK
button.
Specifications
Video Format Support
TV: 1080p, 1080i, 720p, 576p, 480p
PC: up to 1920x1080Pixles
Audio Format Support
PCM, DTS, DOLBY DIGITAL
RF Communication System
MIMO
Modulation
OFDM
Image Delay
< 1ms
Antenna
High Performance Internal Antennas
Operating Frequency
5.1GHz to 5.9GHz
Maximum Transmission Power
12dBm ±2dBm
Power Supply
AC Input 100~240V, DC Output 5V
Operation Temperature
0 to 40
℃
Troubleshooting
The Wireless or Video Link LED is not lit
1.
If the Transmitter and/or Receiver are positioned horizontally move them to the vertical position. Switch both Extender units off and back on.
2.
Reduce the distance between the Transmitter and Receiver units and then switch both WiH130 Tx and Rx units off and back on.
The screen is blank
1.
Check that all connections are correctly made and that all units are powered on.
2.
Check that the Wireless and Video Link LEDs are ON.
3.
Check if correct HDMI input is selected on display.
