9
ConneCtIng yoUr devICeS (continued)
WARNING
n
Only use the appropriate accessories. Otherwise, it may cause a fire or damage to the device and
the projector.
- Only use the accessories specified or recommended by the projector’s manufacturer. Consult
Teq when the required accessory did not come with the product or the accessory is damaged.
It may be regulated under some standard.
- For a cable with a core at only one end, connect the end with the core to the projector. That
may be required by EMI regulations.
- Do not disassemble or modify the projector or the accessories.
- Do not use a damaged accessory. Be careful not to damage the accessories. Route a cable so
that it is neither stepped on nor pinched out.
CAUTION
n
Do not turn on or off the projector while connected to a device in operation, unless it is
directed in the manual of the device.
n
Be careful not to insert a connector incorrectly.
n
Before connecting the projector to a network, be sure to obtain the consent of the
administrator of the network.
n
Do not connect the
lan
port to any network that might have the excessive voltage.
n
Before removing the USB storage device from the port of the projector, be sure to use
the REMOVE USB function on the thumbnail screen to secure your data.
NOTE
n
If a loud feedback noise is produced from the speaker, move the microphone away from
the speaker. This projector does not support plug-in power for the microphone.
