5
Danger Risk of burning and accidents!
do not store the device in immediate proximity
to combustibles (e.g. petrol) or other flammable
liquids or gases.
– The gas bottle must be separated from the device during sto-
rage.
– Replace the gas cylinder in a flame-free environment.
Danger Risk of burns and injury!
Do not make any changes to the device. Use only
original accessories.
– Any change to the device, especially to the gas-carrying
parts, is strictly forbidden, leads to the immediate expiry of
the guarantee and can also be dangerous!
– For your own safety, only use accessories and additional de-
vices that are expressly specified in the operating instruc-
tions or recommended by the manufacturer.
Danger Risk of burns and injury!
No part of the protection against accidental contact
may be permanently removed.
– The contact protection serves to prevent fire hazards and
burns.
– Danger! It does not offer full protection for small children and
frail people!
Danger Risk of explosion!
Do not use the device in potentially explosive atmos-
pheres with substances such as flammable liquids,
gases and especially paint and dust mist. These sub-
stances can ignite from hot surfaces of the device.
Danger Risk of injury!
Failure to follow the instructions can lead to pro-
blems and hazards when using the device.
– Follow all the instructions listed here.
before first use
Check whether the scope of delivery is complete and in perfect
condition.
Contact your dealer immediately if the scope of delivery is in-
complete or defective.
Do not operate the device if it is defective.
assembly
preparation
Danger Risk of injury!
Failure to follow the instructions can lead to pro-
blems and hazards when using the gas fireplace.
– Follow all of the assembly instructions listed here.
required tools
1 x Phillips screwdriver
1 x adjustable spanner
assembling the fireplace
1. First read through the assembly instructions completely.
2. Allow yourself enough time for assembly and find an even
working space of two to three square meters.
3. Place the necessary tools within reach. Small parts such as
handles might be preassembled.
4. Two people are required for set up.
Step 1
A
C
F
D
Connect the front (C), rear (F) and side parts (A, D) with 8 screws
(1) and 8 washers (3).
Do not fully tighten the screws yet.
Step 2
Place the table top (B) on the frame.
Fasten the table top with 4 screws (2) and 4 washers (4).
B
C
P21070_TEPRO_3189UK_GasFirePalce_210727.indd 5
27/7/2021 4:53 PM
