7
Warning
Warning
Assembly
Preparation
Danger
Required tools
1 x Phillips screwdriver
1 x Adjustable spanner
Assembling the Grill
P140040_TEPRO_00824_up-date_2014_03_12.indd 7
14/3/14 11:51 AM
Risk of damage!
The screws and bolts can
loosen slowly during operation
and affect the grill stability.
– Check whether the bolts are tight prior
to each use. If necessary, tighten all of
the bolts again to ensure the grill
stands stable.
Risk of damage!
Do not use any strong or grind-
ing solvents or abrasive pads
since these can damage the
surfaces and cause perma-
nent scrape marks.
Injury hazard!
Failure to follow these instruc-
tions may lead to problems
and risks while using the grill.
– Follow all of the assembly instructions
listed here.
1. First read through the entire assembly
instructions.
2. Allow yourself enough time for assem-
bly and find an even working space of
two to three square meters.
3. Small parts such as handles will
probably be pre-assembled.
1. Attach slid vent (11) to the outer side of
vertical column (10) using bolt (A) and
wing nut (E).
2. Fasten both parts of vertical column
(9+10) together using hex bolts (B) and
nuts (B).
3. Mount base plate (13) to the assem-
bled vertical column using hex bolts
(B) and nuts (D).
4. Place ash collector (12) under the
vertical column.
5. Mount fire bowl (6) onto the vertical
column using hex bolts (B) and nuts
(D).
6. Connect both wind shield parts (3+4)
using two bolts (A) and nuts (C). Then
attach the assembly to the fire bowl
using bolts (A) and nuts (C).
7. Attach handles (7) with pre-assem-
bled handle supports (8) to both sides
of fire bowl (6) using bolts (A), U-wash-
ers (F) and nuts (C).
8. Place charcoal plate (5) in fire bowl (6).
9. Attach grate grips (2) to cooking grate
(1).
10. Place cooking grate (1) in your desired
position on the windshield.
mportant: All bolts must
be fastened tight.
I