15
16
Fitting Strap To The Ratchet
With the ratchet strap attached to
the D-rings, it can now be connected
to the tree straps.
Check each corner of the Trillium base is
aligned to each anchor point.
15, Give a strong pull before
cranking the ratchet.
14, Lift the Trillium base off the
ground by pulling through
excess strap at each point.
12, Feed the tree strap end
through the spindle.
11, Ensuring there’s enough
length, bring the ratchet
and tree strap together.
13, Feed it in and pull it
through making sure it
does not twist.
