8, Feed this loop underneath
8, Feed this loop underneath
the top strap piece to form
the top strap piece to form
a tight knot.
a tight knot.
7, Poke the strap through the
7, Poke the strap through the
D-ring to form a loop that
D-ring to form a loop that
will hold the tension.
will hold the tension.
5, Wrap the loose end
5, Wrap the loose end
underneath the straight edge.
underneath the straight edge.
4, Pull the strap attached to
4, Pull the strap attached to
tree through the D-ring.
tree through the D-ring.
9, This knot can be released
9, This knot can be released
by pulling the loose end.
by pulling the loose end.
6, Continue over the top and
6, Continue over the top and
back underneath again
back underneath again
and hold underneath.
and hold underneath.
Tying The Half Windsor
Tying The Half Windsor
Once all 3 straps are around the selected
Once all 3 straps are around the selected
trees, they can then be connected to the
trees, they can then be connected to the
D-rings. 2 of the corners require Half
D-rings. 2 of the corners require Half
Windsor knots, one at the rear/tail and
Windsor knots, one at the rear/tail and
the other at either front corner.
the other at either front corner.
Rear/Tail:
Rear/Tail:
Attach Half Windsor
Attach Half Windsor
knot
knot
Flite
Flite
Front:
Front:
Tie Half Windsor on one side use
Tie Half Windsor on one side use
ratcher for last corner.
ratcher for last corner.
11
12
