Tentel K-320, User Manual

Page: 3 / 8

2
INTRODUCTION
Thank you for choosing Tentel K-320 Caller ID Telephone set. To get the full benefit
of features of the phone, please read and follow all instructions and store it in a safe
place for further reference.
Symbols
Scroll up Scroll down Ringer volume
Call back Mem Memory key Speaker volume
Mail Ringer tone Key lock
INSTALLATION
Parts List
Each phone is equipped with the following parts:
1. Handset
2. Coiled cord
3. Flat telephone line cord
4. User manual
5. Jack box
Installation Procedure
1. Plug one end of the "coiled cord" into the handset and the other end into the
handset jack of the telephone.
2. Plug one end of the flat telephone line cord into the telephone and the other end
into the wall-socket. Use the enclosed wall-socket if the existing wall-socket in
your office/home is not compatible with the telephone line cord.
3. If you wish to mount your phone on the wall, make sure that you remove the
wall-mounting clip by sliding it out of the slot, rotate it 180 degrees, and re-insert it
back into the slot. This will hold the handset in place when the phone is mounted
on the wall. (An optional wall-mounting bracket is required.)