Repeat steps 2-4 on the opposite side of the fusion panel, connecting it to the
second tent.
Attach the zipper pull on the fusion panel to the beginning of the zipper found
on the tent. The tent zipper will be located between the bladder and the roof
material. It may be necessary to pull back the roof material to reveal the
zipper – as it can be quite taut against the bladder.
Zip the fusion panel in completely along the curve of the tent opening. Once
zipped, run the Velcro straps on the bottom of the fusion panel through the
metal brackets found on both legs of the tent.
Step 1
3
Align two GYBE tents of the same size next to each other.
Locate one of the zippers on the fusion panel. Find the zipper pull and ensure
that it is at the beginning of the zipper.
Step 2
Step 3
Step 4
FUSION PANEL
