background image

19

RECHARGEABLE BATTERY

The TRACK E has a built-in, rechargeable and replaceable Lithium-Polymer 
battery. Charging is possible via USB-C. The charging status will be shown 
by the charging LED right next to the USB-C port. The internal battery can 
be charged from any USB power source.

The charging time is max. 2 hours if the battery is completely empty. Fully 
charged, TRACK Es can run for up to 10 hours. When the battery is at less 
than 10%, Tentacle indicates this by flashing the level LED yellow several 
times. The device continues to run in this state, until it switches itself off at 
3% of battery status. If the battery is completely empty, the TRACK E can 
no longer be switched on before it has been recharged. 

The battery is easily replaceable, once the performance is decreasing   
after 2-4 years depending on the use. A battery replacement kit can be 
obtained from Tentacle Sync.

In this case please contact 

[email protected]

Please note:

  The charging process of the battery is stopped as soon 

as temperatures below 0° or above +40° are reached in order to 
preserve the battery‘s lifetime. This will be indicated by a red charging 
LED.

Summary of Contents for TRACK E




























Reviews: