TensCare nouri auto, User Manual

Page: 10 / 60

10
Power Supply
Input: AC100-240V (50/60Hz) 0.2A
Output: 5V/1A
Built-in lithium ion battery: 3.7V/850mAh
Warning:
• Do NOT use a USB charging cable other than the cable provided.
Warning:
• Do not heat thawed milk again.
• Do not use microwave oven to defrost breast milk.
• Do not heat milk with boiling water.
• If hot water is used to heat milk, please try milk temperature before
feeding.
Feeding Breast Milk
It is recommended that breastfeeding is well established prior to bottle
feeding your baby.
• Always inspect the bottle, teat and other parts before and after each use.
If the teat appears cracked or torn, stop using immediately.
• To prevent possible choking hazard, test the strength of teat by pulling on
bulb portion of the teat.
• Do not attempt to enlarge the teat hole.
• Infants must not be bottle fed without adult supervision.
•
The teat should not be used as a pacifier.
• Clean and disinfect the bottle before first use and after every use.
Charging your Nouri Auto
To charge the Nouri Auto, connect the USB charging cable to the pump and
a power socket. The charging indicator and battery level will show on the
display.
When fully charged, the battery indicator will stop flashing and show a full
battery.
The Nouri Auto can be used during charging if needed.
The battery has a charge time of 2 hours and will last for 70 minutes before
needing to be recharged.