13
14
Program ( ) Button
EmbaGYN has four preset programs.
The first time you use the device, it will
automatically be set to the Stress Program.
To change the program, simply press the “P” button.
The screen will show the program selected. The next
time you turn the device on, it will automatically
display the last program you used.
Lock Button
The Lock button can be used to lock all the controls
except for the strength down and OFF buttons. This
way you won’t accidentally change the settings while
you use the unit, but you still have the ability to
decrease the strength at any time. To lock the unit,
press and hold down the Lock button for three
seconds until LOCK is displayed on the screen.
To unlock the unit, simply repeat.
Time Selector ( ) Button
The EmbaGYN Pelvic Floor Exerciser counts down
the minutes of your session. This countdown is
displayed on the screen. When the count reaches
zero, the unit will automatically turn off.
Each time you switch on the EmbaGYN, the time selector will be set at 20
minutes.
Your physician may advise you to use EmbaGYN for a shorter or
a longer period.
You can change the length of your program by repeatedly
pressing and releasing the Time Selector button. This allows you to select a
program length of 10, 20, 30, 45, 60, or 90 minutes or continuous time (i.e.,
until you turn it off manually). The length of time that you have selected will
be displayed on the screen.
To PAUSE the session
– in case you need to suspend the treatment
session and resume later – hold down the Time Selector button for three
seconds. The display will read “PAUSE”.
To return to the main screen, press any other key and you will return to the
settings where you left off.
Only adjust the Timer in accordance with the advice of your treating physician.
OFF ( ) Button
To turn EmbaGYN OFF:
Press the OFF button.
You will hear a double beep.
NOTE: Always make sure the unit is OFF before
removing the EmbaGYN Trainer from your vagina.
Lock
Button
