5. Put the stand’s feet near their
final place, spreading the baseline
by about your body length, laying
the apexes together in a V shape.
If on a slope, assure that the feet
are level.
A good place provides for a foot-
end anchor a body length or more
away in the direction the V points.
See
Anchoring
on page 6 for
detailed notes.
6. Attach the
black end
of a guyline
to the bottom (foot end) apex,
passing the pole connector line
through one of the upper daisy-
chain loops to leave a tail of loops
inside the stand. These will be your hammock suspension. See step 10 for a peek at
the end result.
7. Secure the orange end loop of the guyline to the anchor.
8. Lift the top (head end) apex to erect the stand. Unwrap any lines from around poles
so they run cleanly across the corners. Set the stand ridgeline to maximum length.
3
