Tenqa HP-109 Instruction Manual Download Page 4

2

Operating Instructions

charging

Use the included USB cable to connect the HP-109 with a USB port on your 

computer or with a USB wall adapter. Charging will start automatically when 

the HP-109 is connected and the red indicator light will turn on. Once charging is 

complete, the light will turn off. Make sure you charge the unit for at least 3 hours 

before first use.

Power on/off

Press and hold the button with the phone symbol for about 4 seconds to turn on, 

and two seconds to turn off. 

Please note that the HP-109 needs to be paired with another 

Bluetooth

 source 

before it can transmit voice or music.

Pairing

Note:

 Your audio device must support 

Bluetooth

 A2DP compatibility to connect 

with the HP-109. Alternatively, you may pair the HP-109 with a 

Bluetooth

 transmit-

ter connected to your audio device. This guide does not provide steps for pairing 

your stereo headset with these devices. Please consult the user manual for the 

device with which you are attempting to pair for operating instructions.

“Pairing” means creating a trusted relationship between two or more 

Bluetooth

 

devices. The devices must be paired before they can communicate with each other. 

Pairing identification is stored for later use, and the devices will automatically 

recognize each other the next time they are connected. 

After successfully pairing for the first time, you simply need to follow the direc-

tions for POWER ON/OFF above for your device to be recognized by your mobile 

phone.

Note:

 Make sure the HP-109 is “off” before starting the Pairing procedure.

how to pair with mobile phones, android, iPhone®, iPad®

iPod touch®

Place the HP-109 within 30 cm of the device with which you are pairing.

1. 

Hold down the “phone button” for about 6 seconds and you will see the indica-

2. 

tor light flash half red/half blue and hear a tone. CONTINUE HOLDING the 

button until you hear another tone (about 9 seconds total) and the red and blue 

light flash intermittently. This indicates the device is in pairing mode. 

Summary of Contents for HP-109

















Reviews: