TB 510
English
29
Technical data
Declaration of network compatibility
For the product: TB 510/TB 510 Exp analog telephones
This device has been approved Europe--wide for connection to public
telephone networks as individual terminal equipment in accordance with
decision 1999/303/EC of the commission.
Because of the differences between the public telephone networks in
different countries, however, this approval does not unconditionally
guarantee successful operation of the device at every network termination
point.
If problems occur when operating the device, inform your dealer immediately.
The manufacturer: Tenovis GmbH & Co. KG
Kleyerstraße 94
D--60277 Frankfurt am Main
Germany
declares, that it is familiar with the suggestions and possible modifications of
these published in the ETSI guidelines EC 201121, and that these have been
implemented in accordance with product and software type. The product
versions and software settings with which the device can be operated in
various countries are listed below:
TB 510/TB 510 Exp product versions:
Germany, Belgium, Finland, Greece, Luxembourg, Norway,
Austria, France, Spain, Italy, Switzerland, England, Portugal,
Sweden, Ireland, Iceland, Netherlands, Denmark
Also note that the device requires a minimum loop current of 19 mA. The call
detection works from 30 V. Connecting several telephones together can lead
to a slight attenuation of the voice signal. The manufacturer accepts no
liability regarding the operation of features to which the standard established
by decision 1999/303/EC does not apply.
Furthermore, the manufacturer is not familiar with any other European
networks with which operation of the device could result in structural
difficulties.
Summary of Contents for TB 510
Page 2: ...TB 510 2 2 1 1 2...