TB 13 Operating instructions
16
Integral 33:
This function enables you to use another telephone
(excluding TH 13, TM 13 and TS 13) to set up call diversion for
your telephone. You must, however, first set up the diversion on
your phone.
You always have to press the Programming key to start and end
the programming mode. This is the only way to store your
entries permanently.
Integral 33:
After you have finished your input and pressed the
redial key, you can continue programming, e.g. make changes
to the acoustic settings.
Integral 33:
Enter a number higher than 2000.
The PIN set in the factory is 0000.
Integral 5 / 3 only:
If a caller is included in your call list, the
entry will be removed from the list. Deleting displayed entries is
also possible with the Delete function key.
Integral 33:
You can adjust the tone and volume for different
ringing tones. When programming, enter the corresponding
code and setting.
Integral 33:
You can change your telephone’s pre--settings.
When programming, enter the corresponding code.
Through programming you can assign
different functions or destinations to the 10 function keys. To
delete the previously assigned function, program the key as
usual and omit the code.
Integral 5 / 3:
There are further details about the assignment of
functions and the respective codes in the instruction manual for
your telephone system, or find out more at your service point.
Follow me
Programming
Changing
your PIN
Call list
Volume
and tone
Setting your
telephone
Assigning
function keys
Summary of Contents for Integral TB 13
Page 19: ......
