9.
If joining more than one unit together, your original unit
should have been assembled with ZTP uprights on one end,
as described in step 5. Simply continue adding shelf supports
and uprights to complete your additional units.
8.
If particle board or wire decking was purchased, place the
decking on each shelving level. Particleboard decking should
fit flush inside the shelf supports, while wiring decking will
sit slightly below the shelf support edges. If you have
purchased a single unit,
your shelving unit is
now complete.
For adder units,
proceed to step 9.
7.
Attach the remaining shelf supports at the desired shelf levels.
6.
With the help of an associate, connect the two unit ends
with left-to-right shelf supports (Ref. No. 3). Be sure the
shelf support is oriented as show below.
