Steel Top
WBSR-XX
Left Hand
Suspension
Bracket Assembly
Rear Cross
Brace
1
/
4
-20 x
1
/
2
Bolt
1
/
4
-20 Nut
1
/
4
-20 x
1
/
2
Bolt
1. Install WBSR-XX running front to back as shown using two
1
/
4
-20 x
1
/
2
bolts.
2. Attach Left Hand Suspension Bracket Assembly to WBSR-XX using four
1
/
4
- 20 x
1
/
2
bolts. Attach
Rear Cross Brace using two
1
/
4
-20 x
1
/
2
bolts and nuts.Repeat steps for Right Hand Suspension
Bracket Assembly.
3. Extend both suspensions out completely and move the ball cage part of the middle suspension member to
the front.
22
1
/
4
" center to center of
WBSR-XX mounting bolt
READ INSTRUCTIONS CAREFULLY BEFORE
ATTEMPTING TO ASSEMBLE THE PACKING TABLE
4. Next, carefully insert the drawer with the inner suspension memeber attached into the ball cage of the middle
section of the suspension and gently close the drawer.
5.
Cycle the drawer in and out a few times to check operation. The drawer and suspensions have a 50 pound weight
capacity rating.