ASSEMBLY OF SERVICE CART
Two people are recommended for assembly. Approximate assembly time: 15-20 minutes.
The reference numbers used throughout this sheet refer to the illustration on the back cover.
This is to help you to identify the various parts as they are mentioned.
1.
Place the light fixture on a flat surface. Align the holes in the cross brace with the holes in the light fixture.
Attach the light fixture with two
1
/
4
”-20 x
5
/
8
” hex head bolts and two
1
/
4
”-20 nuts as shown in figure below.
2.
Choose the desired location for the cross brace on the hanging brackets. Once a location has been selected,
attach the brackets to the cross brace assembly with four
1
/
4
”-20 x
5
/
8
” hex head bolts and four
1
/
4
”-20 nuts
as shown below.
NOTE: The light can be mounted flat on the bottom of the bracket or angled back on the top of the bracket.
