REPLACEMENT PARTS
REF.
NO.
1
2
3
4
5
6
7
PART NO.
1.
Attach the horizontal section frame and
side on both ends to the frame and side
of the vertical units, using six bolts and
nuts and tighten securely.
2.
After attaching the horizontal section to the vertical outer units,
stand the units up using at least one more person to help. Now slide
three hangers over the coat rod and bolt the hangers under the middle
section as shown. Attach with one bolt per hanger. Outer hangers bolt
through the side of the unit; center hanger can bolt
straight up into the locker bottom.
3.
Anchor the unit to the wall or
floor. Lockers are not intended
to stand free, and may topple
if not secured. Units standing
back to back should be bolted
together.
NOTE: Additional hardware may be included for replacement purposes.
Tennsco makes every effort to ensure that all units ship complete with all parts and arrive undamaged.
However, should your unit contain missing or damaged parts, please contact your purchase location.
Ref.
No. 4
Ref.
No. 3
Ref.
No. 5
Ref.
No. 2
*Included in hardware pack enclosed (Part No.: HWSRSHP).
49B260
Locker Door
Finger Pull
Coat Rod Bracket
Coat Rod
Number Plate/Clear Label Cover*
Push Plug*
Bolts and Nuts #8-32 x 1/2”*
LBD-1212
LFP-1
LCRB-1
LCR-36
LCR-48
LNP-3CP
LPP-1
**
16
16
3
--
1
16
32
15
15
15
3
1
--
15
30
15
4
4
3
--
1
4
8
3
3
3
3
1
--
3
6
3
QTY.
DESCRIPTION
16-PERSON
SRS-721878-x
15-PERSON
SRS-601878-x
4-PERSON
BS1-121812-4
3-PERSON
BS1-121812-3
**Available Locally
Ref.
No. 1
NOTE: Illustrations below show a
15-Person Locker; the 16-Person Locker
assembles exactly the same way, except
there is an additional locker opening in
the center section.
