Tennsco Open Foreman's Desk Assembly Instructions/Parts Manual Download Page 2

Page: 2 / 4

ASSEMBLY OF AN OPEN FOREMAN’S DESK

Two people are recommended for assembly. Approximate assembly time: 30-40 minutes.

Tools required: slotted screwdriver, Philips screwdriver, and

”

wrench or nut driver.

The reference numbers used throughout this sheet refer to the illustration on the back cover.

This is to help you to identify the various parts as they are mentioned.

First, remove all parts from carton and check against the

parts list on back cover for any missing parts. The drawer has

been placed inside the desktop for packaging purposes. While

it is not necessary to remove the drawer to assemble the unit

you may wish to do so for easier access.

Next, attach the desk riser (Ref. No. 1) to the back of the

desktop assembly (Ref. No. 2) using four of the bolts and

nuts (Ref. Nos 8 & 9) supplied. If you have left the drawer

inside the desk top, slide the drawer partially forward for

easier access to the back holes.

Attach the four legs (Ref. No. 4) to the desktop assembly

using eight bolts, inserting them into the pre-welded nuts

on each leg.

Summary of Contents for Open Foreman's Desk

Page 3: ...ext place the shelf Ref No 5 into position and bolt the shelf and shelf support to the rear legs again using one bolt per leg Secure the shelf by bolting it to each shelf support 5 If the drawer was removed from the desktop earlier re insert it now 4 Insert the drawer lock Ref No 7 into the drawer front Ref No 6 then attach with the accompanying hex nut 7 5 3 6 3 ...