6.
Place the top shelf (Ref. No. 2) over the four clips at the top
of the unit. Be sure that the shelf is pushed securely into
the clips.
7.
Insert four shelf clips into the bottom slots of the end panels
in the same way that you did in the top of the unit in step 5.
8.
Place a shelf into the bottom four clips as in step 6.
9.
Position the remaining shelf clips according to the desired
shelf heights, and place the shelves over the clips. Keep in
mind while placing the clips, that the post hole pattern
of two round holes and then one square hole, repeated
every 3 inches can greatly help in positioning the clips at
the same level.
NOTE: Once the bottom shelf is in place, carefully
lift the top end of the unit with the help of an
associate, so that the shelving unit is standing
upright.
NOTE: Some shelves, depending upon their placement,
could possibly require repositioning of some of the
back and end panel bolts in order to insert the shelf.
Once everything is correctly positioned tighten the bolts.
