ASSEMBLY OF CABINET CASTER KIT
Tools Needed:
A free
11
/
32
” nut driver is included with each Tennsco cabinet.
Two people are recommended for assembly. Approximate assembly time: 20-30 minutes.
2.
As you prepare to attach the casters, take some time to consider where you want to place the two swivel casters with brakes. If
the cabinet will be placed against the wall, we recommend placing the braking casters along the front of the base.
1.
The reference numbers used throughout this sheet refer to the illustration on the back cover. This is to help you to identify the
various parts as they are mentioned.
3.
Attach two swivel casters (Ref. No. 2) and two braking swivel
casters (Ref. No. 3) to the caster frame (Ref. No. 1), using the
nuts and washers provided (Ref. Nos. 6 and 7). Use a
9
/
16”
wrench to tighten the casters securely.
5.
Position the caster kit frame on the bottom of the cabinet. The back of the caster kit has a “hem” (A) that will fit over the flange
at the bottom rear of the cabinet (B).
4.
After making sure that the cabinet is unloaded, then lay
the cabinet on the floor with the door facing up.
NOTE: It is recommended that the bottom of the
cabinet is a minimum of 1/2
”
off the floor, in order
to more easily attach the caster kit to the unit.
NOTE: All casters must be tight
for unit to work properly
Hem on caster frame
(A)
Back panel flange on cabinet
(B)