29
T380AMR 9020999 (08-2020)
OPERATION
DOUBLE SCRUBBING
NOTE: Double scrubbing is available in Manual
Mode only.
Do Not
operate the machine on an
autonomous cleaning route with the squeegee in
the raised (double scrub) position.
For heavily soiled areas, use the double scrubbing
method.
Double scrubbing can be performed using the
ec-H2O
SCRUBBING SYSTEM (option) or
CONVENTIONAL SCRUBBING methods.
Loosen the double scrub caster knob, lower the
double scrub caster, and tighten the knob to
secure the squeegee into the raised position.
To double scrub, press the
1-Step button
, then the
vacuum fan button
. The light in the v
acuum fan
button
will turn off, the squeegee will raise and the
vacuum fan will stop operating. Then scrub the
area.
Let the cleaning solution set on the
fl
oor for 3-5
minutes.
Before scrubbing the
fl
oor a second time, loosen
the double scrub caster knob, raise the double
scrub caster, and tighten the caster knob to secure
the double scrub caster in the raised position.
Press the
vacuum fan button
again to lower the
squeegee to turn on the vacuum fan. The light
in the
vacuum fan button
will illuminate. Scrub
the
fl
oor a second time to pick up the cleaning
solution.
WARNING: Flammable materials or
reactive metals can cause an explosion
or
fi
re. Do not pick up.
NOTE: If needed, reduce solution
fl
ow when
scrubbing the
fl
oor for a second time.
NOTE: Double scrubbing is not recommended in
areas where the cleaning solution will run under
racks or damage products.
