EN
OPERATION
14
Tennant T2 (07--08)
4. Prop up the recovery tank for ventilation
(Figure 31).
FIG. 31
5. Connect the charger’s AC power supply cord into a
properly grounded receptacle (Figure 32).
NOTE:
The machine will not operate when charging.
FIG. 32
6. Once the charging cycle begins, the indicator lights
will progress from red, yellow to green (Figure 33).
When the green indicator light comes on, the
charging cycle is done. Unplug the charger cord.
If the charger detects a problem, the charger will
display an fault code (See ON--BOARD BATTERY
CHARGER FAULT CODES).
FIG. 33
ON--BOARD BATTERY CHARGER FAULT CODES
FAULT CODE
FAULT
SOLUTION
Yellow Light Flashing
Loose charger cable connection
Check charger cable connection
Loose or damaged battery cable
Check battery cable connections
Unsuitable battery
Replace with proper battery
Output short circuit -- damaged output cable
Contact Service Center
Internal short circuit -- blown output fuse
Replace battery charger
Red Light Flashing
Safety timer exceeded maximum charging
time
Repeat charging cycle. If error repeats,
replace batteries
