Page 2 of 3
KIT NO. 9017891
9017892 Rev. 00 (04- 2018)
Tennant Company
www.tennantco.com
7.
Install the new single pole connectors on the battery
cable harness (Figure 9). Fully insert the cable terminal
into the connector until it clicks into position. Pull test
the cable to ensure terminal is engaged with lock tab
as shown.
Lock Tab
Fig. 5
8.
Remove the battery cable connector bracket from the
machine (Figure 6). Save mounting hardware.
Fig. 6
9.
Remove the double pole connector from the bracket
and discard bracket (Figure 7). Save hardware.
Fig. 7
10. Remove the double pull connector from the battery
cables and discard (Figure 8).
Fig. 8
11. Install a new single pole connector on the red cable
(Figure 9).
Fig. 9
12. Using the supplied mounting hardware, attach the
single pole connector to the new bracket as shown
(Figure 10).
Fig. 10
