IB 340753 (01- 2007)
2
8. Disconnect the cables from both scrub head
drive motors and the wires and hose from the
water solenoid valve. Refer to Fig. 1.
Disconnect
motor cables
from main
wire harness
Disconnect wires
and hose from
solenoid valve
FIG. 1
9. Remove the hardware (A) holding the scrub
head to the machine and slide the scrub head
from under the machine. Set the hardware
aside. Refer to Fig. 2.
10. Remove the lift arms (B) from the scrub head.
Set the lift arms and hardware (C) aside.
Refer to Fig. 2.
Remove hardware (A)
(not shown) from this
side of machine also
B
A
A
A
A
A
C
C
C
C
Actuator
FIG. 2
