MAINTENANCE
81
810 Gas/LPG 330160 (9--97)
9. Disengage the hopper support bar and lower
the hopper.
10. Adjust the side brush pattern with the side
brush down pressure knob.
SKIRTS AND SEALS
HOPPER LIP SKIRTS
The hopper lip skirts are located on the bottom
rear of the hopper. The skirts float over debris and
help deflect that debris into the hopper. The top
skirt is segmented.
Check the hopper lip skirts for wear or damage
daily.
Replace the hopper lip skirts when they no longer
touch the floor.
BRUSH COMPARTMENT SKIRTS
The brush compartment skirts are located on the
bottom of each of the two main brush doors and
around the ends of the brush on the main frame.
The inside brush door skirt should touch the floor,
and the outside brush door skirt should clear the
floor by 3 to 5 mm (0.12 to 0.25 in).
Check the skirts for wear or damage and
adjustment daily.
NOTE: The brush door skirts have slotted holes to
allow for a ground clearance adjustment. The door
must be closed for proper adjustment.
NOTE: Tire pressure will affect skirt clearances.
08491
08493
