OPERATION
7100 330690 (9--09)
36
DOUBLE SCRUBBING
Double scrubbing is the process of making two or
more scrubbing passes over a heavily soiled area.
The first scrubbing pass is made with rear
squeegee up to allow the solution to soak into the
floor.
Double scrubbing can be performed using the
FaST SCRUBBING SYSTEM (option),
ec--H2O
SCRUBBING SYSTEM (option) or
CONVENTIONAL SCRUBBING methods.
Press the
scrub switch
to start the normal
scrubbing operations.
Press the
rear squeegee switch
to raise the rear
squeegee and turn off the vacuum system.
Use the maximum solution flow setting and a
higher brush pressure setting. Let the solution
remain on the floor for 5 to 15 minutes. Decrease
the solution flow, then make a second scrubbing
pass with the rear and side squeegees down.
NOTE: When using the FaST or ec--H2O system
(option), the solution flow lever is nonfunctional.
The FaST and ec--H2O system flow rates are
pre--set. The ec--H2O module has optional flow
rate settings. If solution flow adjustments are
required, contact an Authorized Service Center.
FOR SAFETY: When using machine, go
slow on inclines and slippery surfaces.
OPERATION ON INCLINES
Drive the machine slowly on inclines.
FOR SAFETY: When using machine, go
slow on inclines and slippery surfaces.
The maximum rated climb and descent incline
with empty tanks is 11
_
, with full tanks is 4
_
.
FOR SAFETY: Before leaving or
servicing machine, stop on level
surface.
