OPERATION
31
5700XP 331533 (10--08)
3. FaST SCRUBBING: Press the top of the
FaST switch to start the FaST system.
NOTE: When using the FaST system (option), the
solution flow lever is nonfunctional. The FaST
system flow rate is pre--set.
NOTE: Leave the FaST switch in the
CONVENTIONAL SCRUBBING position if not
using the FaST system.
ec--H2O
SCRUBBING: Press the top of the
ec--H2O
switch to start the
ec--H2O
system.
NOTE: When using the ec--H2O system (option),
the solution flow lever is nonfunctional. The
ec--H2O system flow rate is pre--set. The ec--H2O
module has optional flow rate settings. If solution
flow adjustments are required, contact an
Authorized Service Center.
NOTE: Leave the ec--H2O switch in the
CONVENTIONAL SCRUBBING position if not
using the ec--H2O system.
NOTE: The ec--H2O system indicator light will not
turn on until the machine starts scrubbing.
ec--H2O
SCRUBBING: If an alarm sounds and
the
ec--H2O
system indicator light begins to blink
red, the
ec--H2O
module must be flushed to
resume
ec--H2O
operation (See
ec--H2O
MODULE FLUSH PROCEDURE)
NOTE: When the alarm sounds and the light
blinks red, the machine will bypass the ec--H2O
system. To continue scrubbing, turn the ec--H2O
switch off and change over to conventional
scrubbing.
ATTENTION: (
ec- H2O
model) Do not allow
solution tank to run dry.
ec- H2O
module
failure may result if operated without water for
an extended period.
ec- H2O
SYSTEM
INDICATOR LIGHT CODE CONDITION
Solid green
Normal operation
Blinking red
Flush
ec--H2O
module
Solid red
Contact Service Center