Tennant 5700 Operator'S Manual Download Page 66

Page: 66 / 230

MAINTENANCE

5700 MM400 (3--97)

SQUEEGEE

The squeegee assembly channels water into the

vacuum fan suction. The front blade channels the

water, and the rear blade wipes the floor.

Check the squeegee blades for damage and wear

daily. Rotate or replace either of the squeegee

blades if the leading edge is torn or worn half-way

through the thickness of the blade.

The squeegee can be adjusted for leveling and

deflection. The deflection and leveling of the

squeegee blades should be checked daily, or

when scrubbing a different type of floor.

The squeegee assembly can be removed from

the squeegee pivot to prevent damage during

transport of the machine, or when changing to a

different squeegee width. The squeegees are

available in three widths to be used with the three

different model scrub heads; model 700 (700 mm

(28 in)), model 800 (800 mm (32 in)), and model

900 (900 mm (36 in)).

REMOVING THE SQUEEGEE ASSEMBLY

1. Raise the squeegee.

2. Turn the machine power off and set the

parking brake if your machine has this

option.

FOR SAFETY: Before leaving or

servicing machine, stop on level

surface, and turn off machine.

3. Remove the squeegee suction hose from

the squeegee.

Summary of Contents for 5700







































































































































































































































Search results

Summary of Contents for 5700

Reviews:

Tennant 5700, Operator'S Manual, Page: 66 / 230

Search results

Summary of Contents for 5700

Reviews: