MAINTENANCE
3-29
215 MM157 (4--90)
SKIRTS AND SEALS
BRUSH SKIRTS
Brush skirts control main brush dusting. They are
located on each of the side access doors. The
skirts should be inspected for wear or damage
daily. They should clear the floor by 0 to 0.12 in (0
to 5 mm) at all times.
TO ADJUST BRUSH SKIRTS
1. Park the machine on a smooth, level floor.
2. Stop the engine and set the parking brake.
FOR SAFETY: Before Leaving Or
Servicing Machine; Stop On Level
Surface, Set Parking Brake, And Turn
Off Machine.
3. Unlatch and open the left side access door.
4. Loosen the skirt and retaining strip. Adjust
the skirt height, retighten the retaining strip,
and close and latch the door.
5. Check the skirt clearance.
6. Loosen the two right side access door
screws and remove the right side access
door.
B
A
01795
RIGHT SIDE SKIRT
A. Retaining Strip
B. Side Skirt
7. Loosen the skirt retaining strip, adjust the
skirt height, and retighten the retaining strip.
8. Check the skirt clearance.
9. Reinstall the right side access door.
TO REPLACE BRUSH SKIRTS
1. Park the machine on a smooth, level floor.
2. Stop the engine and set the parking brake.
FOR SAFETY: Before Leaving Or
Servicing Machine; Stop On Level
Surface, Set Parking Brake, And Turn
Off Machine.
3. Unlatch and open the left side access door.
4. Remove the skirt retaining strip and the
brush skirt.
5. Loosely install the new dust skirt with the
retaining strip.
6. Close the access door and check the floor
clearance.
7. Adjust the skirt so that it clears the floor by 0
to 0.12 in (0 to 5 mm) and tighten the
retaining strip screws.
8. Close and latch the left access door.
9. Loosen the two right side access door
screws and remove the right side access
door.
10. Remove the skirt retaining strips and the
brush skirt.
11. Loosely install the new brush skirt with the
retaining strips.
12. Adjust the skirt so that it clears the floor by 0
to 0.12 in (0 to 5 mm) and tighten the
retaining strip screws.
13. Reinstall the right side access door.
Summary of Contents for 215
