January 2017
Installation
1
2
4
5
3
Place QuikTRAY™ pilaster behind face-frame
or set back, according to type of cabinet
construction or hinges being used. Rest
pilaster against cabinet bottom. Fasten with 5
wood screws or 4 Euro Screws.
Attach hook dowels (hooks pointing up) at front
and back of drawer slide. Front hook dowels on
slides must be mounted as far forward as possi-
ble.
To position back pilaster, insert two drawer slides
of your choice to top and bottom of secured front
pilaster and to unattached rear pilaster. Float rear
pilaster into postion and fasten with screws. Repeat
procedure on the other side.
Move slides to desired position, inserting at slight
angle.
With patented hook dowels, no tools are required to
install slides and trays. Just insert dowel with hook
pointing up, then push down to lock into place.
Hook dowels allow slides to move laterally to adjust
for cabinet and drawer width tolerances.
Install drawers or trays.
1
2
3
4a
4b
4
5
More installation information and video available at www.quiktray.com.
4a
4b
1.800.TENN.TEX
8011 National Service Road
Colfax, NC 27235
WWW.QUIKTRAY.COM
WWW.TENNTEX.COM
WWW.BRACKETSOLUTIONS.COM
WWW.QUIKTRAYSTORAGESOLUTIONS.COM