TM-901
Calibrating Length Measurements
Value Parameter
As step 1 to 3, and press
key into setting cable
category, type and length. As shown in Figure.
Press
and
key to select cat5 or cat6, and
press
key to enter. Press
and
key to
select UTP or FTP, and press
key to enter. Key
in a known length of cable, press
and
key
to increase and decrease length.
Press the
key
can change the length units. As shown in Figure.
Press
key to finish setting and waiting 5~6
seconds to calculate and acquire measurements
value parameter.
EN-22
Summary of Contents for TM-901
