background image

EN-8

causing damages in transit.

˙

Repairs made necessary by previous attempts for repair
carried out by non skilled or unauthorized personnel.

˙

Instruments for whatever reason modified by the
customer himself without explicit authorization of our
Technical Dept.

The contents of this manual may not be reproduced in any
form whatsoever without the manufacturer’s authorization.
Our products are patented and our logotypes registered. We
reserve the right to modify specifications and prices in view
of technological improvements or developments which might
be necessary.

Service

If the equipment is an exception, calling repair before you
test the battery and test lines and other conditions, if
necessary, replace it.
If the device still does not operate, check whether the
operating procedures described in this manual consistent.
To equipment repair, you must return the service at the (local
address or regional offices), the customer pays the freight
must be obtained before sending the other party's consent.
Must be used to send the original packaging and included in
the device more clearly as possible the content.
If you do not use the original packaging to send the sender
will be responsible for damage caused.
Shouldn’t the instrument work properly, before contacting
your distributor make sure that batteries are correctly
installed and working, check replace them if necessar

y

Should you need for any reason to return back the
instrument for repair or replacement take prior agreements
with the local distributor from whom you bought it. Do not

Summary of Contents for TM-223













Reviews: