Clamp Meter
With T
Temperature
Page <14>
20/09/10 V1.1
http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk
Sleep Mode
To preserve battery life, the Meter automatically turns off if you do not turn the rotary switch or press any button for around 15
minutes.
The Meter can be activated by turning the rotary switch or pressing any button with the following conditions:
1) When the Meter is entered Sleep Mode at temperature functions of Model: UT202, the Meter cannot be activated by turning the
rotary switch to AC current ranges.
2) By pressing any button must be according to
”The Effectiveness of Functional Buttons” on page 12
3) The Hold function will be cancelled if the Meter is activated by pressing the
HOLD
button.
To disable the Sleep Mode function, press and hold
HOLD
button while turning on the Meter.
Specifications
A. General Specifications:
••
Maximum voltage including transient overvoltage between any terminals and grounding: 500V rms.
••
Display
: 3 1/2 digits LCD display, Maximum display 1999
••
Auto Polarity Display
••
Overloading
: Display
OL
or –
OL
••
Battery Deficiency
: Display
••
Measurement Speed
: Updates 3 times/second.
••
Measurement Deviation
: When the conductor being measured is not placed in a correct position during AC current
measurement, it will cause 1% reading deviation.
••
Drop Test
: 1 meter drop test passed.
••
Max. Jaw Size
: 28mm diameter.
••
Projected Max.
Current conductor size
: 26mm diameter.
••
Power
: 2pcs of 1.5V battery (AAA)
••
Battery Life
: typically 150hours (alkaline battery)
••
Sleep Mode (can be disabled)
••
Dimensions (H x W x L)
: 30mm x 76mm x 208mm.
Weight
: Approximate 260g (battery included)