www.element14.com
www.farnell.com
www.newark.com
www.cpc.co.uk
TM
TM
Page <6>
V1.0
23/08/18
Mode 0: Suitable for SMT, small welding work, in which temperature and its stability is highly required.
Mode 1: Suitable for welding work with different welding spots at the same time, back to temperature quickly.
Mode 2: Suitable for welding work with large amount of tin used, such as welding terminals, back to temperature very quickly,
large dynamic temperature range.
Attention: Original mode is Mode 1.
7. Sleeping mode setting
Sleeping power-off / power-on function and sleeping time can be set separately, which ensures energy saving and energy
consumption reducing.
Setting method:
Press “▲”and “▼” at the same time (picture 6), enter into programming mode (picture 7).
Under programming mode, press “2” (picture 10), or press”2” for 3 times continuously, then enter into sleeping setting mode
(picture 13-sleeping mode is off).
Under sleeping setting mode, press “▲” or “▼” (picture 5), input sleeping time (minute), then press “2” to save (picture 14,
sleeping time is 10 minutes).
If the sleeping mode is on and there is, no welding work or any operation in set time, the device will be in sleeping
(Mode2-no sleeping) and work in 200°C. If temperature is below 200°C, sleeping function won’t be activated.
Under sleeping mode, press any key to restart the device, and it can work under previous temperature.
Attention: Original mode- Sleeping status is off
8. Password-locked setting
This device is added with password-locked function for the convenience of equipment management for production line. When
the unit is locked, users can’t alter the settings without password.
Setting method:
8.1. Press “▲”and “▼” at the same time (picture 6), enter into programming mode (picture 7).
8.2. Under programming mode, press “3” (picture 15), enter into password-locked setting, current display is like picture
16( password locked on). picture 17 ( password locked off)
