47
Model 72-8720: OPERATING MANUAL
l
l
l
l
l
l
l
Press
RECALL
to recall the stored value and
RECALL appears to confirm the operation.
The upper right secondary display shows the index
number ìNo.xxxxî.
The primary display shows the corresponding
recalled data.
The lower right secondary display shows the total
number of the stored data.
Press button to enable the SEND feature to export
the data to the computer via USB or RS232. The
software shows the data storing time and also the
data value. After the data transferring is completed,
the SEND feature will be disabled automatically .
Press
+
or
-
button to view additional stored reading.
Press and hold
+
or
-
to access quick recalling.
Press
EXIT
to exit recalling.
Recalling Stored Readings
Use the following procedure to recall the stored reading:
Using Send
When using a Send feature, please refer to the
Installation Guide of the included CD-ROM. It is possible
to use RS232 or USB interface cable to connect between
computer and the Meter.